For sale Top Flite - P 47 Thunderbolt - click here Model "history": Until now model have 133 flights. First 70 flights was with Zenoah G 45, and after that I put new Zenoah G 62. My friend made custom silencer for this engine, because I don't want to cut cowl. I will give G 62 original exhaust. Propeller is Metts 22x8, and spiner is from True Turn... Motor work fantastic... Model was never crashed, just once I have bad landing, and broke retract plate in the wing and made little damage on the bottom surface. I arranged that very good, and after that have more than 40 flights... I buy model in USA and bring it in Serbia. I made all model. With model I bought all what Top Flite give in parts list. Cowl is separately purchased, made for this model and it is all from fiberglass... Gas tank is Dubro, 0,7 dl, with tygon tubes and big clank inside. All tygon tubes are in good condition... Servos are Futaba for ailerons two Futaba 9001, for rudder Futaba 3305, throtle servo, tail wheel servo and pneumatic ventil servoa are Futaba 3003, ailerons two Futaba 9001 and for flaps two Futaba 9001. Model have workable landing light (work with standard Futaba servo) and red & green lights in the wing corners. Pneumatic ventil push switch for activation. This system has 3 cell NcMh battery... When retrackts goes down landing light go down also and vice versa... All pneumaic system is Robart. Ventil have regulation, big air tank, Robart main gear ( http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSK74 ) and Robart tail wheel ( http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXET17&P=M ). All tubes are Robart also with quick connectors... Wheels are Dubro 5" in diameter I have JR receiver (not included in this offer) with two batteries (NcMh 2650 mAh) and two Futaba heavy duty switchers... In model is also battery checker... Model have cockpit and very scale detailed pilot, bought in FTE firm in USA... All controls are made from 3mm wires... Thunderbolt is 12 kg heavy, and fly like a dream... Take off is in 30 meters, and landing with flaps are piece of cake... Flaps very much slow down a model. I am little sad because sell this model, but must be practical, I have new Ziroli Hellcat (15 flight till now) and made three new models (Ziroli Lightning, Ziroli Stuka and 102" Meister Scale P 47)... You just need receiver, and fill the fuel... Price for complete model (without receiver) is 1500.- euro I can offer one more possibility, just to sell model with pneumatic system (retracts, air tank, ventil, air tubes, wheels...). In that case P 47 will be 950.- euro All parts from Thunderbolt I can use for my new Stuka... Contact on my e mail address: mirce.rc@gmail.com |




